Stop

SCPI Command :

POWer<*>:SWITching:REGion:TON:STOP

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(power=Power.Default) → float[source]

# POWer<*>:SWITching:REGion:TON:STOP
value: float = driver.power.switching.region.ton.stop.get(power = repcap.Power.Default)

Sets the start time for the conduction area in relation to the trigger point. This value is also end time of the turn on area.

Parameters:: power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)
Returns:: t_2_position: -500 to 500

set(t_2_position: float, power=Power.Default) → None[source]

# POWer<*>:SWITching:REGion:TON:STOP
driver.power.switching.region.ton.stop.set(t_2_position = 1.0, power = repcap.Power.Default)

Sets the start time for the conduction area in relation to the trigger point. This value is also end time of the turn on area.

Parameters:

t_2_position – -500 to 500
power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)