Offset

SCPI Command :

POWer<*>:SWITching:POWer:VERTical:OFFSet

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(power=Power.Default) → float[source]

# POWer<*>:SWITching:POWer:VERTical:OFFSet
value: float = driver.power.switching.power.vertical.offset.get(power = repcap.Power.Default)

Sets the vertical offset of the power waveform if the relevant POWer<m>:{SUBSYS}:POWer:VERTical:SCALe:MODE command is set to MANual.

Parameters:: power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)
Returns:: vertical_offset: -100000000000000 to 100000000000000

set(vertical_offset: float, power=Power.Default) → None[source]

# POWer<*>:SWITching:POWer:VERTical:OFFSet
driver.power.switching.power.vertical.offset.set(vertical_offset = 1.0, power = repcap.Power.Default)

Sets the vertical offset of the power waveform if the relevant POWer<m>:{SUBSYS}:POWer:VERTical:SCALe:MODE command is set to MANual.

Parameters:

vertical_offset – -100000000000000 to 100000000000000
power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)