Y

SCPI Command :

POWer<*>:SOA:MTESt<*>:SEGMent<*>:POINt<*>:Y

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(power=Power.Default, maskTest=MaskTest.Default, segment=Segment.Default, point=Point.Default) → float

# POWer<*>:SOA:MTESt<*>:SEGMent<*>:POINt<*>:Y
value: float = driver.power.soa.mtest.segment.point.y.get(power = repcap.Power.Default, maskTest = repcap.MaskTest.Default, segment = repcap.Segment.Default, point = repcap.Point.Default)

Sets the vertical position of the selected point.

Parameters:

• power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

• maskTest – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mtest’)

• segment – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

• point – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Point’)

Returns:

y: -1E+26 to 1E+26

set(y: float, power=Power.Default, maskTest=MaskTest.Default, segment=Segment.Default, point=Point.Default) → None

# POWer<*>:SOA:MTESt<*>:SEGMent<*>:POINt<*>:Y
driver.power.soa.mtest.segment.point.y.set(y = 1.0, power = repcap.Power.Default, maskTest = repcap.MaskTest.Default, segment = repcap.Segment.Default, point = repcap.Point.Default)

Sets the vertical position of the selected point.

Parameters:

• y – -1E+26 to 1E+26

• power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

• maskTest – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mtest’)

• segment – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

• point – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Point’)