Voltage

SCPI Command :

POWer<*>:HARMonics:SOURce[:VOLTage]

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(power=Power.Default) → SignalSource[source]

# POWer<*>:HARMonics:SOURce[:VOLTage]
value: enums.SignalSource = driver.power.harmonics.source.voltage.get(power = repcap.Power.Default)

Sets the channel for the voltage source input of the power harmonics analysis.

Parameters:: power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

set(source_voltage: SignalSource, power=Power.Default) → None[source]

# POWer<*>:HARMonics:SOURce[:VOLTage]
driver.power.harmonics.source.voltage.set(source_voltage = enums.SignalSource.C1, power = repcap.Power.Default)

Sets the channel for the voltage source input of the power harmonics analysis.

Parameters:

source_voltage – C1 | C2 | … | C8 | M1 | M2 | … | M8
power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)