User

SCPI Command :

POWer<*>:HARMonics:PFACtor:USER

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(power=Power.Default) → float[source]

# POWer<*>:HARMonics:PFACtor:USER
value: float = driver.power.harmonics.pfactor.user.get(power = repcap.Power.Default)

Available if method RsMxo.power.harmonics.standard.set() is set to ENC and method RsMxo.power.harmonics.pfactor.mode.set() is set to USER. Sets a user-defined power factor.

Parameters:: power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)
Returns:: user_power_factor: 0 to 100

set(user_power_factor: float, power=Power.Default) → None[source]

# POWer<*>:HARMonics:PFACtor:USER
driver.power.harmonics.pfactor.user.set(user_power_factor = 1.0, power = repcap.Power.Default)

Available if method RsMxo.power.harmonics.standard.set() is set to ENC and method RsMxo.power.harmonics.pfactor.mode.set() is set to USER. Sets a user-defined power factor.

Parameters:

user_power_factor – 0 to 100
power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)