Offset

SCPI Command :

POWer<*>:EFFiciency:OUTPut<*>:POWer:VERTical:OFFSet

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(power=Power.Default, output=Output.Default) → float[source]

# POWer<*>:EFFiciency:OUTPut<*>:POWer:VERTical:OFFSet
value: float = driver.power.efficiency.output.power.vertical.offset.get(power = repcap.Power.Default, output = repcap.Output.Default)

Sets the vertical offset of the power waveform if the relevant POWer<m>:{SUBSYS}:POWer:VERTical:SCALe:MODE command is set to MANual.

Parameters:

power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)
output – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

Returns:

vertical_offset: -100000000000000 to 100000000000000

set(vertical_offset: float, power=Power.Default, output=Output.Default) → None[source]

# POWer<*>:EFFiciency:OUTPut<*>:POWer:VERTical:OFFSet
driver.power.efficiency.output.power.vertical.offset.set(vertical_offset = 1.0, power = repcap.Power.Default, output = repcap.Output.Default)

Sets the vertical offset of the power waveform if the relevant POWer<m>:{SUBSYS}:POWer:VERTical:SCALe:MODE command is set to MANual.

Parameters:

vertical_offset – -100000000000000 to 100000000000000
power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)
output – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)