Upper

SCPI Command :

P3PHase<*>:QUALity:REFLevel<*>:RELative:UPPer

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(power3PhaseMeas=Power3PhaseMeas.Default, refLevel=RefLevel.Default) → float[source]

# P3PHase<*>:QUALity:REFLevel<*>:RELative:UPPer
value: float = driver.p3Phase.quality.refLevel.relative.upper.get(power3PhaseMeas = repcap.Power3PhaseMeas.Default, refLevel = repcap.RefLevel.Default)

Sets the upper relative reference level if method RsMxo.p3Phase.harmonics.refLevel.relative.mode.set() is set to USER.

Parameters:

power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)
refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

upp_ref_lev_rel: -100 to 200

set(upp_ref_lev_rel: float, power3PhaseMeas=Power3PhaseMeas.Default, refLevel=RefLevel.Default) → None[source]

# P3PHase<*>:QUALity:REFLevel<*>:RELative:UPPer
driver.p3Phase.quality.refLevel.relative.upper.set(upp_ref_lev_rel = 1.0, power3PhaseMeas = repcap.Power3PhaseMeas.Default, refLevel = repcap.RefLevel.Default)

Sets the upper relative reference level if method RsMxo.p3Phase.harmonics.refLevel.relative.mode.set() is set to USER.

Parameters:

upp_ref_lev_rel – -100 to 200
power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)
refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)