Value

SCPI Command :

P3PHase<*>:QUALity:POWer<*>:VERTical:SCALe[:VALue]

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(power3PhaseMeas=Power3PhaseMeas.Default, power=Power.Default) → float[source]

# P3PHase<*>:QUALity:POWer<*>:VERTical:SCALe[:VALue]
value: float = driver.p3Phase.quality.power.vertical.scale.value.get(power3PhaseMeas = repcap.Power3PhaseMeas.Default, power = repcap.Power.Default)

Sets the vertical scale of the specific power waveform if the relevant P3PHase<m>:{SUBSYS}:POWer:VERTical:SCALe:MODE command is set to MANual.

Parameters:

power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)
power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

Returns:

vertical_scale: 1E-12 to 100000000000000

set(vertical_scale: float, power3PhaseMeas=Power3PhaseMeas.Default, power=Power.Default) → None[source]

# P3PHase<*>:QUALity:POWer<*>:VERTical:SCALe[:VALue]
driver.p3Phase.quality.power.vertical.scale.value.set(vertical_scale = 1.0, power3PhaseMeas = repcap.Power3PhaseMeas.Default, power = repcap.Power.Default)

Sets the vertical scale of the specific power waveform if the relevant P3PHase<m>:{SUBSYS}:POWer:VERTical:SCALe:MODE command is set to MANual.

Parameters:

vertical_scale – 1E-12 to 100000000000000
power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)
power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)