Enable

SCPI Command :

P3PHase<*>:QUALity:DISPlay:POWer<*>:APParent[:ENABle]
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(power3PhaseMeas=Power3PhaseMeas.Default, power=Power.Default) → bool[source]
# P3PHase<*>:QUALity:DISPlay:POWer<*>:APParent[:ENABle]
value: bool = driver.p3Phase.quality.display.power.apparent.enable.get(power3PhaseMeas = repcap.Power3PhaseMeas.Default, power = repcap.Power.Default)

Enables the apparent power measurement for individual phases for the 3-phase power quality analysis.

Parameters:

  • power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

  • power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

Returns:

display_state: OFF | ON

set(display_state: bool, power3PhaseMeas=Power3PhaseMeas.Default, power=Power.Default) → None[source]
# P3PHase<*>:QUALity:DISPlay:POWer<*>:APParent[:ENABle]
driver.p3Phase.quality.display.power.apparent.enable.set(display_state = False, power3PhaseMeas = repcap.Power3PhaseMeas.Default, power = repcap.Power.Default)

Enables the apparent power measurement for individual phases for the 3-phase power quality analysis.

Parameters:

  • display_state – OFF | ON

  • power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

  • power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)