FilterPy

SCPI Command :

P3PHase<*>:EFFiciency:OUTPut<*>:SOURce:CYCLe:FILTer
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(power3PhaseMeas=Power3PhaseMeas.Default, output=Output.Default) → float[source]
# P3PHase<*>:EFFiciency:OUTPut<*>:SOURce:CYCLe:FILTer
value: float = driver.p3Phase.efficiency.output.source.cycle.filterPy.get(power3PhaseMeas = repcap.Power3PhaseMeas.Default, output = repcap.Output.Default)

Configures a bandwidth limitation.

Parameters:

  • power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

  • output – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

Returns:

dig_filter_lowpass_cut_off_freq: 100 to 4000000000

set(dig_filter_lowpass_cut_off_freq: float, power3PhaseMeas=Power3PhaseMeas.Default, output=Output.Default) → None[source]
# P3PHase<*>:EFFiciency:OUTPut<*>:SOURce:CYCLe:FILTer
driver.p3Phase.efficiency.output.source.cycle.filterPy.set(dig_filter_lowpass_cut_off_freq = 1.0, power3PhaseMeas = repcap.Power3PhaseMeas.Default, output = repcap.Output.Default)

Configures a bandwidth limitation.

Parameters:

  • dig_filter_lowpass_cut_off_freq – 100 to 4000000000

  • power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

  • output – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)