Open

SCPI Command :

FRANalysis:REFCurve<*>:OPEN

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(refCurve=RefCurve.Default) → bool[source]

# FRANalysis:REFCurve<*>:OPEN
value: bool = driver.franalysis.refCurve.open.get(refCurve = repcap.RefCurve.Default)

Loads the reference waveform file selected by method RsMxo.franalysis.refCurve.name.set() .

Parameters:: refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)

set(refCurve=RefCurve.Default) → None[source]

# FRANalysis:REFCurve<*>:OPEN
driver.franalysis.refCurve.open.set(refCurve = repcap.RefCurve.Default)

Loads the reference waveform file selected by method RsMxo.franalysis.refCurve.name.set() .

Parameters:: refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)

set_and_wait(refCurve=RefCurve.Default, opc_timeout_ms: int = -1) → None[source]