Delay

SCPI Commands :

FRANalysis:MEASurement:DELay:MODE
FRANalysis:MEASurement:DELay[:TIME]
FRANalysis:MEASurement:DELay:STATe
Commands in total: 4
Subgroups: 1
Direct child commands: 3
get_mode() → MeasDelayMode[source]
# FRANalysis:MEASurement:DELay:MODE
value: enums.MeasDelayMode = driver.franalysis.measurement.delay.get_mode()

Selects the delay mode.

Returns:

meas_delay_mode: TIME | PERiod

get_state() → bool[source]
# FRANalysis:MEASurement:DELay:STATe
value: bool = driver.franalysis.measurement.delay.get_state()

Enables the measurement delay.

Returns:

meas_delay: OFF | ON

get_time() → float[source]
# FRANalysis:MEASurement:DELay[:TIME]
value: float = driver.franalysis.measurement.delay.get_time()

Sets a time delay, that the system waits before measuring the next point of the plot. This is helpful in systems that need more time to adapt to the new frequency, for example if filters with significant time group delays are present. The settings takes effect if if method RsMxo.franalysis.measurement.delay.state() = ON and method RsMxo.franalysis.measurement.delay.mode() = PERiod.

Returns:

meas_delay_time: 0 to 10

set_mode(meas_delay_mode: MeasDelayMode) → None[source]
# FRANalysis:MEASurement:DELay:MODE
driver.franalysis.measurement.delay.set_mode(meas_delay_mode = enums.MeasDelayMode.PERiod)

Selects the delay mode.

Parameters:

meas_delay_mode – TIME | PERiod

set_state(meas_delay: bool) → None[source]
# FRANalysis:MEASurement:DELay:STATe
driver.franalysis.measurement.delay.set_state(meas_delay = False)

Enables the measurement delay.

Parameters:

meas_delay – OFF | ON

set_time(meas_delay_time: float) → None[source]
# FRANalysis:MEASurement:DELay[:TIME]
driver.franalysis.measurement.delay.set_time(meas_delay_time = 1.0)

Sets a time delay, that the system waits before measuring the next point of the plot. This is helpful in systems that need more time to adapt to the new frequency, for example if filters with significant time group delays are present. The settings takes effect if if method RsMxo.franalysis.measurement.delay.state() = ON and method RsMxo.franalysis.measurement.delay.mode() = PERiod.

Parameters:

meas_delay_time – 0 to 10

Cloning the Group

# Create a copy of the original group, that exists independently
delay_copy = driver.franalysis.measurement.delay.clone()

Subgroups