Invert

SCPI Command :

CHANnel<*>:INVert

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(channel=Channel.Default) → bool[source]

# CHANnel<*>:INVert
value: bool = driver.channel.invert.get(channel = repcap.Channel.Default)

Turns the inversion of the signal amplitude on or off. To invert means to reflect the voltage values of all signal components against the ground level.

Parameters:: channel – optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)
Returns:: invert_channel: ON: inverted waveform OFF: normal waveform

set(invert_channel: bool, channel=Channel.Default) → None[source]

# CHANnel<*>:INVert
driver.channel.invert.set(invert_channel = False, channel = repcap.Channel.Default)

Turns the inversion of the signal amplitude on or off. To invert means to reflect the voltage values of all signal components against the ground level.

Parameters:

invert_channel – ON: inverted waveform OFF: normal waveform
channel – optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)