from .......Internal.Core import Core
from .......Internal.CommandsGroup import CommandsGroup
from ....... import repcap
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class RemoveCls:
"""
| Commands in total: 1
| Subgroups: 0
| Direct child commands: 1
"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("remove", core, parent)
[docs]
def set(self, power=repcap.Power.Default, maskTest=repcap.MaskTest.Default, segment=repcap.Segment.Default, point=repcap.Point.Default) -> None:
"""
``POWer<*>:SOA:MTESt<*>:SEGMent<*>:POINt<*>:REMove`` \n
Snippet: ``driver.power.soa.mtest.segment.point.remove.set(power = repcap.Power.Default, maskTest = repcap.MaskTest.Default, segment = repcap.Segment.Default, point = repcap.Point.Default)`` \n
Deletes the specified corner point of the mask segment. When a point is deleted, the remaining points are reordered
similar to segment deletion (method ``RsMxo.power.soa.mtest.segment.remove.set()`` ) .
:param power: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Power')
:param maskTest: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Mtest')
:param segment: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Segment')
:param point: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Point')
"""
power_cmd_val = self._cmd_group.get_repcap_cmd_value(power, repcap.Power)
maskTest_cmd_val = self._cmd_group.get_repcap_cmd_value(maskTest, repcap.MaskTest)
segment_cmd_val = self._cmd_group.get_repcap_cmd_value(segment, repcap.Segment)
point_cmd_val = self._cmd_group.get_repcap_cmd_value(point, repcap.Point)
self._core.io.write(f'POWer{power_cmd_val}:SOA:MTESt{maskTest_cmd_val}:SEGMent{segment_cmd_val}:POINt{point_cmd_val}:REMove')
[docs]
def set_and_wait(self, power=repcap.Power.Default, maskTest=repcap.MaskTest.Default, segment=repcap.Segment.Default, point=repcap.Point.Default, opc_timeout_ms: int = -1) -> None:
power_cmd_val = self._cmd_group.get_repcap_cmd_value(power, repcap.Power)
maskTest_cmd_val = self._cmd_group.get_repcap_cmd_value(maskTest, repcap.MaskTest)
segment_cmd_val = self._cmd_group.get_repcap_cmd_value(segment, repcap.Segment)
point_cmd_val = self._cmd_group.get_repcap_cmd_value(point, repcap.Point)
"""
``POWer<*>:SOA:MTESt<*>:SEGMent<*>:POINt<*>:REMove`` \n
Snippet: ``driver.power.soa.mtest.segment.point.remove.set_and_wait(power = repcap.Power.Default, maskTest = repcap.MaskTest.Default, segment = repcap.Segment.Default, point = repcap.Point.Default)`` \n
Deletes the specified corner point of the mask segment. When a point is deleted, the remaining points are reordered
similar to segment deletion (method ``RsMxo.power.soa.mtest.segment.remove.set()`` ) .
Same as set, but waits for the operation to complete before continuing further. Use the RsMxo.utilities.opc_timeout_set() to set the timeout value.
:param power: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Power')
:param maskTest: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Mtest')
:param segment: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Segment')
:param point: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Point')
:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call.
"""
self._core.io.write_with_opc(f'POWer{power_cmd_val}:SOA:MTESt{maskTest_cmd_val}:SEGMent{segment_cmd_val}:POINt{point_cmd_val}:REMove', opc_timeout_ms)